HI, I'm running 2 older Multicam routers (built '01 and '03) both have M24 mb's, (3097 and 2323?) I'm running MC suite 3.7 on Windows XP, I use jobserver over LAN to both and would like to upgrade to Windows 7, I would like to know if I will need to update the MC suite and if so is it free or will it cost me?
Thanks for your help.
Paul
Thread: Upgrading MC software question
Results 1 to 2 of 2
-
06-26-2013, 05:25 PM #1
Registered
- Join Date
- Oct 2008
- Posts
- 23
Upgrading MC software question
-
07-02-2013, 02:53 PM #2
Registered
- Join Date
- Jun 2010
- Posts
- 463
Goto this distributors website and you can get the Suite 4 download no charge......try running this on a windows 7 computer that is not connected to your machines, I would run the program in a XP compatibility mode ,not as a Windows 7 program.
http://www.multicamsoutheast.com/wor....php/downloads
Reply With QuoteSimilar Threads
-
upgrading MillPlus software
By dullfig in forum Deckel, Maho, Aciera, Abene MillsReplies: 2Last Post: 11-08-2019, 06:40 PM -
Considering Upgrading Controller, Software, etc...
By getrolfed in forum Controller & Computer SolutionsReplies: 5Last Post: 01-16-2012, 03:46 PM -
Software question
By aka.apprentice in forum Uncategorised CAM DiscussionReplies: 4Last Post: 07-13-2010, 04:19 AM -
Software Question
By PaulD in forum DIY CNC Router Table MachinesReplies: 1Last Post: 02-16-2009, 12:02 AM -
software question
By KEYTEEM in forum Uncategorised CAM DiscussionReplies: 6Last Post: 06-20-2006, 02:31 AM
Posting Permissions
