My Bridgeport Interact 412X will not boot today. It appears not to have 24 volts, but I can't find the 24V supply. I have checked all the circuit breakers and they all have continuity and work properly. The M1 and M2 switches are not engaged I think because of the lack of 24V's that pull them in.
Thread: Bridgeport Interact Dead today
Results 1 to 3 of 3
-
06-26-2013, 06:23 PM #1
Registered
- Join Date
- Dec 2012
- Posts
- 15
Bridgeport Interact Dead today
-
06-28-2013, 12:12 PM #2
Registered
- Join Date
- Jan 2005
- Posts
- 1121
does not boot is not useful terminology
tell us exactly what is happening.
if power enable does not work, check the emo string
-
07-01-2013, 06:04 PM #3
Registered
- Join Date
- Jun 2012
- Posts
- 30
Check the oil level in the way oiler. I had my machine (a Series 1 Mk2 admittedly) in pieces before I spotted the low oil level that was causing my "24v dc supply not present" error.
Reply With QuoteSimilar Threads
-
Bridgeport CNC Series II Boss 6 is Dead!
By grigsby in forum Bridgeport / Hardinge MillsReplies: 20Last Post: 06-18-2016, 09:04 AM -
Interact 412 dead servo drive needed
By Sinij kot in forum Bridgeport / Hardinge MillsReplies: 0Last Post: 07-24-2012, 05:33 PM -
Interact 1 151 axes dead in water
By Cantabrigian in forum Bridgeport / Hardinge MillsReplies: 3Last Post: 09-29-2011, 02:57 PM -
Looking for a Bridgeport vmc 760 or 800 with dead control
By Interact77 in forum Bridgeport / Hardinge MillsReplies: 0Last Post: 05-11-2008, 05:38 PM -
Went to look at a used Bridgeport today.....
By pete from TN in forum Bridgeport / Hardinge MillsReplies: 7Last Post: 05-07-2008, 07:13 PM
Posting Permissions
