G112/G113 stop, not working
We have Nakamura TW-20 with controller Fanuc 0-TB; when the program goes to G-code G112, it stops; can you pls advise us how to release the function of G112/G113 ?
Thank you !
G112/G113 stop, not working
We have Nakamura TW-20 with controller Fanuc 0-TB; when the program goes to G-code G112, it stops; can you pls advise us how to release the function of G112/G113 ?
Thank you !
i learned some info from this blog, hope you can find something here too.China professional manufacturer of laser machine and cnc router.
, this is a supplier of laser and cnc machine , located in Canton City.:wee:
Hi,
Here an example off a hexagon milling-program on a lathe with axial live-tooling.
When you run the program and it stops in the middle for what reason(alarm) you have to finish it with the following lines in MDI-mode.
This is how it works on our lathe.
G1 G40 X90. F2500
G113 ( OR G13.1 )
Maybe you need some other G- or M-codes, G17-G18-G19 ??
%
O1111 ( HEXAGON - 50MM )
T0101 G98
M86 ( C-AXIS CONTROL ON )
G97 S3500 M4
/M8
G0 X90. Z10.
G1 C0 F4000
Z-5. F1000
G112 ( OR G12.1 )
G1 G41 X50. C14.43 F500
X50. C-14.43
X0 C-28.86
X-50. C-14.43
X-50. C14.43
X0 C28.86
X50. C14.43
G1 Z5.
G40 X90. F2500
G113 ( OR G13.1 )
G0 Z50. M5
X250. Z200. M9
M85 (C-AXIS CONTROL OFF )
M30
%