Hello all, I am looking for a rotary table 8", 10", or 12" with a 72 to 1 ratio. Does anybody make one this large in this ratio. I have been looking for quite a while and have been only able to find 4" rotary tables with that ratio. I have a leadwell mcv 550e and already have the motor and it's 72 turns equals 1 360 degree rotation. It also has a 23 tooth synchronous pulley on it that I was going to pull and hook up direct drive to the rotary table if I find one. I could possibly do some sort of belt drive but the 23 tooth pulley doesn't provide a good ratio and the pulley is tapered on the bore so finding another one might be difficult. Any ideas would be appreciated. Thank you.