Yesterday I was running the Taig mill with the Micro Proto system DSLS, and I have it set up to use an Auto Zero, using pin 15 in Mach 3. The weird part I turned the power off on the controller and the contact light was still lighting up in mach 3 when the circuit was complete. Shouldn't the contact not light up when the controller is off?
Results 1 to 1 of 1
-
07-12-2013, 06:52 PM #1
Registered
- Join Date
- Jul 2013
- Posts
- 19
Taig controller off, Auto zero still detected
Reply With QuoteSimilar Threads
-
plasma/flame torch height controller, auto ignitor demo video
By larryy1022 in forum VideosReplies: 0Last Post: 06-08-2011, 02:36 PM -
Auto-Off a problem with the Xbox 360-Wireless-Controller?
By Spartan117 in forum Mach Wizards, Macros, & AddonsReplies: 0Last Post: 08-07-2009, 07:43 PM -
My first home built Taig controller
By nosplinters in forum Taig Mills / LathesReplies: 12Last Post: 03-11-2008, 05:52 PM -
Controller not detected
By Bryscnc in forum CNC (Mill / Lathe) Control Software (NC)Replies: 1Last Post: 03-07-2008, 03:47 PM
Tags for this Thread
Posting Permissions
