Im having trouble getting the home function to work when powering up ,...Won't do it every time . And some help with my User I/O ,How should it read ?
Here are my specs and current user i/o page
VSD-E Servo drive
BL60-235 Servo
VSDEPI Parallel Port Interface
Smooth Stepper USB controller
Results 1 to 2 of 2
-
07-14-2013, 10:51 AM #1
Registered
- Join Date
- Dec 2005
- Posts
- 43
I/O Functions and hard stop homing for Mach 3
-
09-26-2013, 10:47 PM #2
Registered
- Join Date
- Sep 2004
- Posts
- 1207
I checked the settings file and found few potential problems:
-Increase AC phasing current for general operation
Homing:
-Increase Homing hard stop threshold, say 300-600 to see if problem goes away
-Try also increasing homing current limit if problem stays
Reply With QuoteSimilar Threads
-
Limit switches,can i program them to just stop, and not punch out the E-stop in mach
By Vegabond in forum Mach Wizards, Macros, & AddonsReplies: 5Last Post: 12-31-2011, 02:29 AM -
Homing to hard stop problems
By tome9999 in forum CNC Machine Related ElectronicsReplies: 1Last Post: 11-03-2011, 12:20 AM -
Hit hard stop on mini mill
By dpellarin in forum Haas MillsReplies: 4Last Post: 09-30-2010, 03:44 AM -
What is a hard stop?
By Vern Smith in forum Haas LathesReplies: 10Last Post: 02-19-2010, 08:27 PM -
Homing and E-Stop operation with Stepconf
By cadmonkey in forum LinuxCNC (formerly EMC2)Replies: 3Last Post: 03-11-2008, 12:13 PM
Posting Permissions
