Hey i have bought a CNC Control Set with motors (?Free Ship?3 Axis Cnc Nema17 Wantai stepper motor 4000g.cm 3D 42BYGHW609,DQ420MA | eBay) for my selfmade Cnc.
So i build it up like in documentation, and set pins and ports in mach3, but nothing happens.
When i try to close emergency or any other switch mach3 dont get anything! But when I took off the lpt plug and bridge
ground and pins i realised, there's sth wrong. In mach3 i set XLimit Pin 10, YLimit Pin 11, ZLimit Pin 12 and EStop Pin 13, but on the Plug XLimit is Pin 5, YLimit Pin 6 , ZLimit Pin 4 and EStop Pin 3
That means the Pins are
Mach3 Lpt
10 5
11 6
12 4
13 3
15 2
How can these Pinouts so wrong