Hi all,
Having a problem lately with my MB20 with Centurion 6 controller going to 'black screen' because of an error 216, general protection fault. Can't find any information on this. Machine runs fine, doesn't black screen when running. Always seems to happen when machine is sitting idle with the e-stop pressed in. Have no idea why controller would crash in this state. Any ideas?
Results 1 to 2 of 2
-
07-18-2013, 06:35 PM #1
Registered
- Join Date
- Jan 2011
- Posts
- 380
MB20 - Centurion 6 - Error 216 - General Protection Fault
-
07-27-2013, 03:53 PM #2
Registered
- Join Date
- Jul 2010
- Posts
- 548
The 216 error as stated is a "general error" no specific fault. it is possible to track down what it does not like. Note the "at address" (####:####) along with the the software version. Call Miltronics service (952-442-1401) and give them the machine S/N and the error address. It still may come back as unknowen.
It could be due to screen blanking, weak batteries in the motherboard, simdisk.
Post results or PM me.
sportybob
Reply With QuoteSimilar Threads
-
EZ-TRAK - “Possible Pointer Error - General Protection Fault”
By Litespeed in forum Bridgeport / Hardinge MillsReplies: 9Last Post: 12-29-2015, 10:41 PM -
Shipping Motors:Protection In general
By Al_The_Man in forum Community Club HouseReplies: 1Last Post: 06-28-2013, 06:12 PM -
VMC15 fadal, 88HS error#9, spindle driver fault, servo amplifier fault
By kin73 in forum SpanishReplies: 3Last Post: 05-18-2011, 05:26 AM -
milltronics centurion 5 fault
By courtiron in forum MilltronicsReplies: 1Last Post: 02-22-2011, 02:26 AM
Posting Permissions
