584,837 active members*
5,319 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Join Date
    Jul 2005
    Posts
    28

    G2/g3 Helical In Yz(g19)

    Can Anyone Help I Am Trying To Figure Out How To Make A Helical Down The Length Of The Part It Has To Make 9 Comlpete Revolutions Down The Part So It Will Make The 9 Convolutions That I Need. Any Help Would Be Great

  2. #2
    Join Date
    Mar 2006
    Posts
    1625
    ned a little more info and can run there software

  3. #3
    Join Date
    Mar 2003
    Posts
    35538
    I think you need to call the G2 or G3 9 times, specifying the depth per rev for each one. Call the G19 first, of course.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  4. #4
    Join Date
    Mar 2006
    Posts
    1625
    leggetmachine have looked over info and did a quick cad drawing before I get to involve with the code take a look and see if this is about what you want tell me what type of file you can open and I'll send to you for review
    Attached Thumbnails Attached Thumbnails test221.JPG  

  5. #5
    Join Date
    Jul 2005
    Posts
    28

    tHANKS FOR THE HELP

    Thanks for the help i got it figured out getting ready to run the parts tomorrow. but and thank for helping out

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •