can anyone tell me where to get the adapters for different endmills for
a porter cable router
thank you
Rob
can anyone tell me where to get the adapters for different endmills for
a porter cable router
thank you
Rob
not knowing where you are alls i can say is go down the street and take a right go......or try this site
http://www.porter-cable.com/
i looked through the site I didn't find anything I thought maby this would be a part that someone has made to make the router more versitile
Here is the more specific place of three collets...1/4, 3/8, and 1/2.
http://www.porter-cable.com/index.asp?e=3399&p=5338
I know there are other companies that make 1/8 sleeves(I need 3/16), but a few inventive users have made their own special collet tool holders for most used diameters of special bits, and set them up for equal tool length so they can be changed out and still preserve the positioning.
Here are pics of Jeff's efforts to make collets..scroll down after opening:
http://www.homecnc.info/cncrouter.htm
somewhere here in CNCzone there is a thread describing of how he duplicated the profile of the original collet.
Here is a site that I used.
They are the split collar design.
I got the whole 7 piece kit for $19.95
http://www.mlcswoodworking.com/shops.../adapbush.html
Originally Posted by truman
Try this site if you have not found it yet!
They have parts for every power tool !
http://www.toolpartsdirect.com/
Hope this helps,
Eric
www.widgitmaster.com
It's not what you take away, it's what you are left with that counts!