CAD/CAM RECRUITERS, Inc in Charlotte has placed cnc professionals in direct/perm positions in 1981. Below is a partial listing of new positions we have new from VA to FLA..Most provide relo help. we are not on any networks or affiliations so resumes stay just with us and confidential. Please include info with resume such as position desired, $$, locations desired etc. Thanks Bill

*cnc service manager no travel manage six to 90k carolinas very growing young co
*cnc service tech EDM a plus Onsite at extremely automated new plant, travel only 5%.. 75k
* cnc service tech 70% travel lasers/ edm / electro chemical machining a plus 75k
*cnc setup/ mastercam (have almost 7 positions similar to this all over SE USA
*mastercam 5 axis propgrammer..some planning 75k no state tax in FLA
*mastercam mill and lathe programmer/ method engineer north carolina 70
*cnc estimator/foreman/ planner GA aeropsace mastercam a plus but not necc by any means
*mori seiki expert traid area of north carolina need machinist and alos MFG eng
*MITSUBISHI MVR MILL OPERATOR What about a Machine Operator / Programmer to Run our New Mitsubishi MVR 45 Mill,
12 foot wide by 34 foot long moving table Bridge Mill 60" Z carolinas
Machining experience on large fabrication.Machining Cast Iron
Working to close tolerances +/- .003
Fluent in M code G code Programming
Experienced in shimming / Clamping techniques to create a flat part.
*mastercam / gibbscam programmer Foreman
*UG programming manager
*cnc MFG engineer greater Raleigh area
*ROUTER project engineer/ MFG engineer 90s
*router 5 axis programmer marine business
*machinist triad area of NC
"We are in need of a couple “A” Player, 5-axis machinists. We prefer those with experience in a Job Shop environment (Non-Production),
and have experience with Mori Seiki NT type machines/controls. "
*CNC laser repair 50% travel
*surfcam propgrammer FLA and SE VA
*gibbcam programmer/ MFG engineer NC, NC, GA, FL
*Mazak integrex expert western nc, central NC, northern AL
*Mazak lathe FL, SC, charlotte area
*CNC regional product manager Tennessee CAM software sales
*machine tool electrical(harnesses etc) designer NC
*machine tool mech designer NC
*automation engineer (machine tool industry, design oriented)
*esprit programmer / tooling application engineer NC
The position would be 75% programming for milling machines, turning machines, edm, and testing new tooling (process improvements).
25% of the time would be supporting with machine technical issues. There would be less than 2 weeks travel per year for the position

resume in confidence
[email protected]
cadcamrecruiters.com since 1981
 PLEASE include details, resume in word, not PDF please
.