[Jeff E.]

Just replaced my original coolant pump with this one.

http://www.ebay.com/itm/310421918553?ssPageName=STRK:MEWAX:IT&_trksid=p398 4.m1423.l2649

Great pump at a good price.

Mounting requires you to cut a 5 " hole in the top of your Tormach tank if you elect to use it ( I did), and raise the drain tank up by about 5/8" ( I used some scrap as spacers)

I now have more flow & pressure than I know what to do with - I'm using the original shower hose and 2 lock line hoses for delivery, each with a ball valve control - can finally cut pockets etc. without re-cutting my chips. Amazing difference.

Just FYI for those that might be interested

Jeff

[jake hoback]

thanks!

[ag53711]

Just a quick word of caution, here. Remember - the coolant pump outlet is fused at 8A, not 15A. I'm not sure what the inrush current on this particular pump would be, but we recommend the following contactor kit for anything over 125W (1/8 HP):

PN 33044: External Contactor Kit for Coolant Pump

Andy