[Lee337a]

Let me make your program for your mazak. I am fluent with mazatrol and g-code(iso). I can program just about anything on mastercam or iso such as drilling tapping/threading facing plunging high speed feedmilling and surface cutting. I am also fluent in Mastercam if you need anything drafted. My job has slowed down so I'm trying to make a little money on the side with the extra time i have on hand. Email me [email protected] for a quote. all programs are 100% money back guarantee if you don't like the program. Ill let you try the program out first before you pay.

[NobleTech]

Good Morning Lee,
I have a part file
I have BobCad
my machinist has a machine is a AJV 35/60 with M32 controls
we can not get my file into his machine
new to this
I need;
to give someone the tooling mould surface in 3d
have them cut the part file fit his machine
create post processor for his machine for both halfs
how can we achieve this quickly
Attachment 249984