I have no clue where to post this but out of all the forums and places this is the best i can think of so if it in the wrong spot i am sorry...
I am looking for a interesting type of glue. I am going to be temporarily gluing glass to a thin piece of aluminum. I need the glue to dry somewhat fast (3-5 min at the most), has to be resistant to some heat (about 100deg C) and i need to be able to remove the glass later (whether with a debonder or more heat that 100deg C...)
What am i doing... right
I am using it to remove the glass from iPhones and the problem is you get some that are so cracked that i cannot mount that on the machine to remove the glass. So i want to glue it to a thin piece of aluminum so i can mount it in the machine (anchor with the aluminum) remove the glass from the screen and then later remove the glass from the aluminum?
Thanks
Mike