515,627 active members
6,556 visitors online
Register for free
Login
IndustryArena Forum > CNC Plasma, EDM / Waterjet Machines > General EDM Discussion > Need help on workholding pins for sinker EDM
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Oct 2008
    Posts
    2

    Need help on workholding pins for sinker EDM

    Hey guys, I run some sinker cnc edm machines for a mold making company and recently had to burn several pins that were difficult to hold.
    They were made from ejector pins, so they had the head on them, were .976 long OAL, with a burn depth from the small end of .320

    We didn't have any V-blocks thin enough to account for the head diameter, so we wired out a small V spacer.

    I need to find/make something that can hold 4 pins at a time to burn these. We do have a wire machine so that's an option.

    Do you guys have any ideas?

    Thanks,

  2. #2
    Registered
    Join Date
    Jan 2010
    Posts
    485
    The way we did stuff like this, was to make a block that had holes through it and a counter bore for the heads. The block would then be clamped to the table to capture the heads, letting the pin to be machined.

Similar Threads

  1. Sinker EDM---Help?
    By Valimarsbro in forum General EDM Discussion
    Replies: 1
    Last Post: 06-29-2011, 03:15 AM
  2. Online Workholding Shop for Workholding
    By mtadirect in forum News Announcements
    Replies: 0
    Last Post: 08-19-2009, 03:37 PM
  3. DIE SINKER???
    By Haasmanvf3 in forum General MetalWork Discussion
    Replies: 0
    Last Post: 08-06-2008, 01:49 PM
  4. DIE SINKER???
    By Haasmanvf3 in forum Diemaking / Diecutting
    Replies: 1
    Last Post: 08-06-2008, 11:31 AM
  5. cnc sinker help
    By drill in forum General Waterjet
    Replies: 0
    Last Post: 06-13-2005, 08:31 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •