584,812 active members*
5,252 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > EMCO CNC Machines > emco concept 55 mill startup trouble
Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2013
    Posts
    1

    emco concept 55 mill startup trouble

    Hello all. i just got a emco concept mill 55. made in 2006. I have loaded the winnc on to the flash drive and plugged into the machine. All cords are connected to the right place. The monitor goes through the linux code. The monitor reads: finished update. then it asks for a username and password? Where do I get this? And I tried talking to the emco people but they are not responding.

  2. #2
    Join Date
    Sep 2010
    Posts
    18

    Re: emco concept 55 mill startup trouble

    Hi,
    if you are still around! What linux code? - The clue is in the sofware name - 'winnc'...

    cheers,
    john

  3. #3
    Join Date
    Mar 2014
    Posts
    44

    Re: emco concept 55 mill startup trouble

    True. You dont use the Linux machine. You connect is to a windows machine with wincam/camconcept and that does the machine control. You just found the calculation unit of the machine. In the concept mill this is different from the machine control.

Similar Threads

  1. Replies: 0
    Last Post: 08-16-2011, 11:22 PM
  2. emco Concept MILL 300?
    By byronk in forum EMCO CNC Machines
    Replies: 1
    Last Post: 02-17-2011, 11:04 AM
  3. WTB Emco Concept Turn 55
    By crucialthreads in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 10-18-2010, 11:43 PM
  4. Emco Concept 55 Lathe
    By skinnekid in forum EMCO CNC Machines
    Replies: 2
    Last Post: 04-15-2010, 10:27 PM
  5. Emco Concept turn 55?
    By praetor in forum Vertical Mill, Lathe Project Log
    Replies: 0
    Last Post: 06-08-2008, 06:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •