Hello to all. My name is chris and recently graduated a tech high school. I have basic understanding of cnc machines and have operated them at previous interships that i have had within the 2 years. An eyelet company that I am now an intern for has a miyano jnc-60 lathe with fanuc controls. The machine has not been ran for many years. I cleaned it up and played with it abit but there is a problem. Whenever an M-code is implemented, the machine will throw a machine alarm about 1min 30 seconds after any m code is written. MDI, AUTO. I have checked the parameters and all seem correct for the timer setting, which I have researched can cause the machine to not get a ready signal. If anybody has an help or suggestions I can try all id greatly appreciate it. Thank you