Starting up a new product, with the help of an old friend.
I know a lot of folks that have the need for a vacuum solution for single phase applications.
So we are going to bring to market a vac box that we have revamped.
This box uses 4 vac motors that work in tandem to create all most as much suction as a 15 HP
Regenerative Blower Vac.
more specs to come soon as well as price.
I just wanted to see if there was any interest here. I have already taken orders for the system
and know it will be a great solution for the small shop that has no 3 phase power. Also ones on
a budget.
The box will be completely assembled and wired. All you have to do is to run your PVC to it and
create a grid on the table.
This Box is designed to easly install on CAMaster machines. But will work with any CNC Router that will
accept a Vac table.
The system will run on 220v-230v 30 A single phase power. There is two stages to this vac. meaning that
you can run just 2 of the motors if you only need the 2 or turn on the other 2 that will open an internal
gate and give you twice the power.
Please enjoy the attached pics and let me know if you have any feed back.
* this system is not manufactured by CAMaster, inc. I build it in my own shop. I am in negotiations
with CAMaster to offer this unit on there Stinger Series Routers as a great option for a low cost
single phase vacuum.
email me if you have any questions [email protected]