[fender316]

Im using a multicam 3000, suddenly the feedrate is really slow. i am a noob but i been messin with this so much its like i know it better than the back of my hands. had a cnc test file last week it was goin supper fast, now i load the same file and its like molasses. takes over 1/2 hour to cut one letter....im wondering whats goin wrong the feed rate is at 100%

[NSchlee]

Im using a multicam 3000, suddenly the feedrate is really slow. i am a noob but i been messin with this so much its like i know it better than the back of my hands. had a cnc test file last week it was goin supper fast, now i load the same file and its like molasses. takes over 1/2 hour to cut one letter....im wondering whats goin wrong the feed rate is at 100%

Is a speed feed rate assigned to that tool path in your CAM software? If not the controller on the machine runs at its defaults which are usually pretty slow.

Neal

[MCPservice]

Are you using Jobserver as your comm software,and are you using Enroute