584,802 active members*
4,926 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Mori Seiki Machines > Mori Seiki Mills > '06 NH4000DCG G02/G03 over tolerance radius
Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2013
    Posts
    14

    '06 NH4000DCG G02/G03 over tolerance radius



    I'm currently running through a first trial of a program using G03 interpolation of outside radius of 27/64. I'm getting the error msg: "over tolerance of radius". I've come to the start point of this through a G1 cut using a 1.25 inserted end mill. Program is as follows:

    G1X-1.6839F11.
    G17G3X-2.4855Y.63I-.4319F11.
    G1X.0054Y-1.8751F11.
    ...
    .....

    Anyone see my issue here?

  2. #2
    Join Date
    Feb 2009
    Posts
    6028
    Post on the Fanuc forum. Not a machine problem, you'll get quicker help there. The control on that is a 18imb Fanuc.

Similar Threads

  1. Replies: 1
    Last Post: 05-15-2013, 08:52 AM
  2. 021 start radius end radius error
    By XAD in forum Tree
    Replies: 55
    Last Post: 06-01-2012, 04:59 PM
  3. Replies: 7
    Last Post: 10-06-2011, 04:43 AM
  4. Radius to end of Arc Differs From Radius to Startline
    By Bob La Londe in forum Machines running Mach Software
    Replies: 2
    Last Post: 08-10-2010, 03:16 AM
  5. Radius to end of arc differs from radius to start?
    By Jamy in forum LinuxCNC (formerly EMC2)
    Replies: 2
    Last Post: 08-23-2009, 05:28 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •