[bugdog]

Hi
I have been asked to program an old Mori Seiki sl25 mc it is a 2 axis lathe with c axis
At present all the program's are compiled by pc but I want to introduce g71 cycles etc To make the editing of the program easier at the panel at the moment the program has to be sent back and recompiled and returned Crazy really anyway I am quite familiar with Fanuc but the control would not accept what I know would work
Can some please post an example of a roughing of cycle on here so I can at least be sure that the syntax of the program is right
I have no manuals been lost over the years apparently

[ChrisW]

Google for G71 canned cycles
Post your code here what you are trying to do.

[ChrisW]

http://www.cnczone.com/forums/g-code...c_control.html

[bugdog]

Thanks Chris
Great help on the link The code is exactly what I have been putting in as I have an old Fanuc 6t Hitachi 4ne to program at work
I have not tried the two line cycle that is new too me The alar is Iiegal addresses I think the problem may be in the calling of the blocks pand q