[Mike Mattera]

Hey All,

Well we have it! A place for Edgecam users to share ideas and ask questions. I plan to contribute as much as I can (as I learn more about Edgecam).

So here's a simple "Did You Know This"

In any box that requires a number, you can type in a math expression.
Radius = 3/2

Did you know if you press theControl key & the = key at the same time (Ctrl = ) is will display the results.
Radius = 1.5

Mike Mattera
Tips For Manufacturing
http://www.tipsformfg.com

[helix77]

Ive Been Using Edgecam For About 5 Years Know And I Never Knew That !!! Thanx

[Mike Mattera]

Well Helix77, share one with us. Anything.


Here's another one: On the graphics screen. Hold down the wheel on your mouse and move left/right/up/down. It a Pan function.

I just finished a new training cd for Edgecam.
available at http://www.tipsformfg.com

Mike Mattera

[Bent]

In edgecam try the "Help menu" and then "Contents and Index" Search for "hot keys" chose "Hot Key Assignments"
IMO the help function in edgecam is pretty god. Have been using it for some time for milling

Bent

[Mike Mattera]

Most times the help is pretty good until you get the one's that say somehing like.....

"The Twizzle options changes the approach to a Twizzel style."

What ever that means... :-)

Mike Mattera

[WayneHill]

EdgeCam user reporting in. About 7 months experience using V9.75

Some 4th axis experience. Still learning...and learning.. and learning....

[Mike Mattera]

So what do you guys do when you have Edgecam questions? Do you call Edgecam direct, Your reseller, A friend, Ghostbusters ..... Who.....?

Mike Mattera

[WayneHill]

Our EdgeCAM Guru - Curt Long

http://www.pceaze.com/products.htm

[Bent]

We have a service contract with the reseller so we just call

Bent

[helix77]

Our Servicing Is Up So I Have To Answer My Own Questions.... Or I Use This Forum....all Other Resources Would Be Helpful

[helix77]

[QUOTE=Mike Mattera]Well Helix77, share one with us. Anything.


Here's another one: On the graphics screen. Hold down the wheel on your mouse and move left/right/up/down. It a Pan function.

I BOUGHT A LOGITECH MX1000 AND I SET UP THE THUMB BUTTON TO PAN SO I HAVE A BUTTON FOR EACH RANGE OF MOTION (ZOOM, DYNAMIC,PAN)

[Mike Mattera]

So Helix77, who's your reseller? and why did you let your service contract (maintenance ?) expire?

Mike Mattera

[mikewsk2]

hey mike, lighting up this board aren't you. i will stop by here more frequently as well.

I always use the Ctrl+zoom (middle wheel) to quickly zoom into an area quickly. Especially useful when I need to get up on a small chamfer in turning so that my chain is in the correct direction.

[siskk]

Hi everybody
I am curiopus and want to know is edgecam capable of wraping text around a cylinder?
next step for engraving is clear to me. No info was found by me in web. I see the last post here is from 2006, so i hope s,body see my question and answer.
Thank YOU a lot