[TheWorkshopGuy]

I'm still trying to upgrade my Weike LG900 Laser from a PCI to a USB
Controller Leetro MPC6526.

I have everything working but I'm having a problem with the
"Z" access motors "they lock up" and do not initiate
(they make noise but are frozen)when I push the buttons. It's strange............
This video explains the problem: Leetro MPC6525 Laser Controller Card Issue

Is this a software parameter setting issue? If so how do I resolve it?
or
What can I do to troubleshoot this?

I would truly appreciate any information anyone could give me.

[EXLASer]

Hi ,
How about lower moving speed of Z axis ?
If you checked the pins on Z axis driver are matched Z pulse in software ? Contact manufacture what z axis driver pins should be .

Waiting for your good news to solved this .

Best regards,
Mary
XYZ Machinery

[Vicente75p]

hello!

My name is Vicente, I'm from Spain. I have seen the video you've put the problem on the Z axis. Now I have the same problem, could you solve it?, Could tell me how you did it?, anyone know how to solve this?.

Thank you very much for your attention, greetings!