I HAVE A CONTROL UNIT MELDAS 64

M01 OPERATION ERROR 0004


I HAVE CHECK:

1. As the interlock function has activated‚ release it before resuming operation.
2. Check the sequence on the machine side.
3. Check for broken wires in the interlock signal line.
Do not see any unusual problems

I HAVE A M5PLCWIN CONECTION WITH NC UNIT MELDAS 64S BUT WHEN RS 232 COMMUNICATION

I DO NOT UNDERSTAND PLEASE SEND INSTRUCTIONS MANUAL M5PLCWIN

MAIL:[email protected]

THANK YOU VERY MUCH