[okuma_sos]

Dear all
I see the threads is very old, but i have parameter for mazatrol cam T2(QT10)
but i need the manual operation, programing
can who help me ?
Who need the parameter, give me email, i can send parameter, wiring
best regard

[CNCTECHNOLOGY]

Hallo.I"m from Thailand.I need Parameter and Eletric manuals for Mazatrol M4 CamT2, Please help me

[DOrfan]

Hello everybody, I am new at this and would like to ask for some assistance. I got a used MAZAK QT8 with MAZATROL CAM T-2 control and looking for manuals in English language (got it from Germany and therefore manuals are in German language).Anybody can help?

[OvyDee]

i have exacly the same problame as you do my friend...i need operating and programing manual in english or romanian language...can any one help me pls contact me here [email protected]

best regards

P.S i have the manuals in german language and hungarian...if any need just ask

[ramesh030303]

I have manual in English & Japanese language of [U]Mazak QT10n T2 & T3. If you want then call me.

Thanks
Ramesh
Email- [email protected]
Ph.- +91-8802030303
INDIA

[rubicvn]

Dear you

Who can share to me the Mazatrol T1 and T2 manual please. My mail is [email protected].

If anyone has the programming software please, share it with me.

Thank a lot

[hutch07]

Dano_St did you ever receive manuals? I am also looking for them.

[perfomill]

Hi everyone,

I have a Mazak VQC 30/50 with Mazatrol CAM M-2 and I am looking for the programming manual in order to configure a post processor to get programs out of VisualMill CAD/CAM from MecSoft running on my machine. A operators manual would also help as I am new to mill machining. Preferred language is German or English.

Thank you for any help.

[CNCTECHNOLOGY]

Hi everyone,

I have a Mazak VQC 30/50 with Mazatrol CAM M-2 and I am looking for the programming manual in order to configure a post processor to get programs out of VisualMill CAD/CAM from MecSoft running on my machine. A operators manual would also help as I am new to mill machining. Preferred language is German or English.
If your machine don't have EIA/ISO option you can not

Thank you for any help.

If your machine doesn't have the option for EIA/ISO you can't
You need Mazak camware software

[perfomill]

Thank you CNCTECHNOLOGY, My VQC 30/50 has the EIA/ISO option. In the meantime I found all the documentation i was after. All the documents can be found under catiadoc www.catiadoc.free.fr. There are:

- Operator manual for Mazatrol CAM M-2,
- Mazatrol CAM-M2 Programming manual,
- Mazatrol CAM-M2 Programming manual ISO and
- Mazak VQC 30/50 Maintenance manual.

Cheers everyone

[Mammed]

hello
looking for all documentation about the mazatrol cam t2
thanks a lot

[sun]

hello
looking for all documentation about the mazatrol cam t2
thanks a lot

https://www.scribd.com/doc/279424117...graming-manual