502,281 active members
6,368 visitors online
Register for free
Login
Results 1 to 11 of 11
  1. #1
    Registered
    Join Date
    Jul 2009
    Posts
    13

    Exclamation colchester 2000l CNC not ready alarm

    Dear All,

    i have a problem with the Colchester 2000l CNC, the machine boots up with the error 600-06 and "not ready" is flickering on the left side of the screen, no specific alarm number observed

    the machine controller is Fanuc 0t control

    I have checked almost everything, EMG button, circuit, Fuses circuit breakers but with no success

    Anyone have the maintenance manual for Colchester 200l, power diagram please share it with me
    Along with the cabinet contents diagram if you have it

    Email:hakamdowikat@gmail.com

  2. #2
    Junior Member
    Join Date
    Aug 2007
    Posts
    778
    Tell what fanuc do you have?
    0TA? 0TB? 0TC? 0TD?

  3. #3
    Registered
    Join Date
    May 2013
    Posts
    128
    Check The Turret clamp , The Air Pressure Switch and Door interlock it is an External Alarm

  4. #4
    Registered
    Join Date
    Jul 2009
    Posts
    13
    Thank you for the feedback,

    no air pressure to this machine is connected, where the torrent clamp is disabled i suppose since long

    Definitely I have checked all the Emergency buttons and door lock also and no issue observed, this alarm has happen after the main fuse of the machine burned out
    When I replaced it, the alarm appears

    I am attaching here with some pictures from the monitor and the machine PMC
    It might help to identify the problem, and from where the “Not ready” is coming


    Attachment 200046Attachment 200046Attachment 200048Attachment 200050Attachment 200052Attachment 200054Attachment 200056Attachment 200058Attachment 200060Attachment 200062Attachment 200064Attachment 200066Attachment 200068Attachment 200070

  5. #5
    Junior Member
    Join Date
    Aug 2007
    Posts
    778
    email sent
    have you fix your problem?

  6. #6
    Registered
    Join Date
    Jul 2009
    Posts
    13
    Dear All,

    yet I did not solve the problem with my machine,

    any one please can help ?????

  7. #7
    Junior Member
    Join Date
    Aug 2007
    Posts
    778
    May be I could help you. PM me

  8. #8
    Registered
    Join Date
    Jul 2009
    Posts
    13

    Re: colchester 2000l CNC not ready alarm

    Dear All

    still I did not solve the mentioned alarm in my machine, it kept aside due to this now quit long
    any body can help with this error

  9. #9
    Junior Member
    Join Date
    Aug 2007
    Posts
    778

    Re: colchester 2000l CNC not ready alarm

    email sent

  10. #10
    Registered
    Join Date
    Jul 2009
    Posts
    13

    Re: colchester 2000l CNC not ready alarm

    Dear Experts

    any one can help with the machine problem, I observed that the servo cards power is not lighting as usual
    can some one help to diagnose the problem

  11. #11
    Registered
    Join Date
    Jul 2011
    Posts
    20

    Re: colchester 2000l CNC not ready alarm

    Hi, i have a problem with cycle start and the ouput Y49.7. Do you have the ladder where a can see the conditions for these signals?

Similar Threads

  1. Colchester 2000L
    By bertcnc in forum Colchester Tornado lathes
    Replies: 13
    Last Post: 11-23-2018, 09:32 PM
  2. Colchester 2000L APC 310 and 320 Alarm
    By rjhzxc in forum Colchester Tornado lathes
    Replies: 2
    Last Post: 04-23-2014, 02:38 PM
  3. Colchester 2000L Fanuc OT
    By davee1987 in forum Uncategorised MetalWorking Machines
    Replies: 3
    Last Post: 05-18-2013, 10:26 PM
  4. FIRE!!Colchester 2000L Fanuc OT
    By davee1987 in forum Fanuc
    Replies: 3
    Last Post: 11-23-2012, 01:15 AM
  5. Need Parameters For Colchester 2000L CNC
    By Hakam in forum Colchester Tornado lathes
    Replies: 1
    Last Post: 10-27-2012, 02:46 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •