[lakeside]

Post any file you would share with us and just a brief description

This is a clipper ship dxf

[Ken_Shea]

21 TIMES

I don't have any fun type files, but I will look to be sure.

[jimini]

Here's a project you might be interested in.If I remember correctly it use a 1/16" bit on 1/8" MDF.

[jimini]

Here's a project you might be interested in.If I remember correctly it use a 1/16" bit on 1/8" MDF.

I didn't send a picture of the Eagle, sorry about that.
Here's one incase you build it.

[jerlas]

I didn't send a picture of the Eagle, sorry about that.
Here's one incase you build it.

Here are some pics of this same eagle made of steel

[rpage]

Here are some pics of this same eagle made of steel

What gauge steel did you use? I had built the trex some time ago and used 10 gauge for him.

Looks nice!

[jerlas]

What gauge steel did you use? I had built the trex some time ago and used 10 gauge for him.

Looks nice!

I made it out of 16 gauge steel The dxf I have needs some work as I had to force some of the parts together but it turned out all right in the end. If your interested I could upload the DXF for someone but I have to warn you it might have to have some modification made to it.

[w.jansen]

Hay Jimini

Do you have a picture of how to put all this together ?

Thanks:
Willem

[jimini]

Hay Jimini

Do you have a picture of how to put all this together ?

Thanks:
Willem

I've forgotten what the file is of, if you let me know I'll see about some pictures. jimini

[wjfiles]

I am not far enough advanced to post any files just yet.
I have an idea for one of my projects that may be construed as an artistic contribution.
The machinist Cube, can anyone dimension the paths for milling this cube so that the last operation would be to go back and release each cube.
This would make a great conversation piece.
I am thinking about a 3" cube with maybe 4 internals done in a nice hard timber.
I could maybe train some ants to go in and polish the inside
wjf

[RayinNH]

The trick to the cube is using a key seat, or dovetail cutter to undercut each cube. You need to make plugs, so when you cut the last 2 sides, they don't move.

[mcnerney]

Myxpykalix

Here are a few that might work.

[Greolt]

Does anybody know where this artwork is?

I think I found it somewhere in this thread but can't find it now.

I carved this in a scrap of MDF but no longer have the artwork.

Would like to do it in a nice piece of timber.

And while I am asking, any more similar to this?

Greg

[myxpykalix]

here it is....

[jaded_prince200]

does anyone have a maltese cross, i need one for the fire dapartment here. thanks

[jaded_prince200]

thanks, those worked good.

[Weldtutor]

does anyone have a maltese cross,

There are 2 Maltese crosses here to choose from.

Hope 1 works for you. If so please post a picture. :idea:

[Maccarly]

This is a 3-Plane Material Foamalux 5 mm

[RAGE]

SUPER COOL STEELE3470!!!

[steel3470]

thank you i was finaly able to contribute something.


i was woundering if you guys could help me out i am trying to get a sign made up with a jack russel head and i am comeing up short i i found the mini pincher one and looks just like our other dog but am trying to put a jack russel on it....by the way it will be a birthday present for my wife.