584,842 active members*
4,614 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Knee Vertical Mills > HELP Enshu Yuasa AccuMill 1547 with Fanuc 3M
Results 1 to 2 of 2
  1. #1

    HELP Enshu Yuasa AccuMill 1547 with Fanuc 3M

    I have an Enshu Yuasa AccuMill 1547 with Fanuc 3M. It has worked well for years. The last time I powered it up, I got a not ready message on the controller. I was able to get the machine to move in all axis by holding the limit release switch but only in the - direction. I am not hearing the normal sounds I hear on start up.
    There are no blown fuses, no apparent relay issues, or anything that jumps out saying this is the problem.

    Please help if you can.
    Ed

  2. #2
    Join Date
    Aug 2020
    Posts
    14

    Re: HELP Enshu Yuasa AccuMill 1547 with Fanuc 3M

    Quote Originally Posted by EDL at AU View Post
    I have an Enshu Yuasa AccuMill 1547 with Fanuc 3M. It has worked well for years. The last time I powered it up, I got a not ready message on the controller. I was able to get the machine to move in all axis by holding the limit release switch but only in the - direction. I am not hearing the normal sounds I hear on start up.
    There are no blown fuses, no apparent relay issues, or anything that jumps out saying this is the problem.

    Please help if you can.
    Ed

    Interesting. If anyone can help me with a similar problem, described here, please do.

    https://www.cnczone.com/forums/fanuc...tem-ready.html

Similar Threads

  1. NEED ADVICE re: Enshu Yuasa AccuMill 1547 with Fanuc 3M
    By crobox in forum Knee Vertical Mills
    Replies: 47
    Last Post: 01-20-2023, 10:00 PM
  2. Enclosure for a Enshu AccuMill
    By AccuMillGuy in forum Knee Vertical Mills
    Replies: 1
    Last Post: 08-28-2020, 12:47 PM
  3. enshu yuasa accu-mill am1547 tool offsets?
    By kustomkb in forum Uncategorised MetalWorking Machines
    Replies: 3
    Last Post: 08-28-2020, 12:44 PM
  4. Enshu Yuasa AccuMill 1547 with Fanuc 3M
    By fixer2 in forum Knee Vertical Mills
    Replies: 4
    Last Post: 08-28-2020, 12:37 PM
  5. Troubles with YUASA ACCU-MILL AM 1547
    By thucmie in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 09-09-2008, 08:37 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •