584,802 active members*
4,926 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Rhinocam > changing default settings
Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2003
    Posts
    1206

    changing default settings

    I have inherited the job of programming a CNC router using Rhino and Rhinocam.Quite impressive software-but.......it frustrates me enormously by reverting to the original parameters for almost everything even when using the same type of machining operation within a single object.For instance the stock alignment always reverts to centred and top surface.The pocketing toolpath always goes back to the same stepover setting even when selecting a different set of features within the same operations browser.
    Is there a way to impose my preferred settings and have them memorised?

  2. #2
    Join Date
    Dec 2003
    Posts
    1206
    Everybody else using Rhinocam must be happy withthe way they have their systems set up.I had hoped to be able to set the software to suit my working practices rather than accepting the defaults.

Similar Threads

  1. overiding default settings
    By Pete M in forum Surfcam
    Replies: 2
    Last Post: 10-21-2012, 04:48 PM
  2. default depths not changing
    By hatchmar in forum BobCad-Cam
    Replies: 3
    Last Post: 07-18-2012, 01:12 PM
  3. Sinumerik 810M changing default settings
    By ignace in forum SIEMENS -> GENERAL
    Replies: 0
    Last Post: 10-07-2010, 05:18 PM
  4. Preferences / settings default
    By DIFF OVER in forum BobCad-Cam
    Replies: 3
    Last Post: 09-06-2010, 09:26 PM
  5. Mastercam 9.1 default settings
    By Fatty in forum Mastercam
    Replies: 2
    Last Post: 06-29-2006, 05:04 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •