Maintenance just lit up in red at the bottom of the screen.
I went into system->maint. It shows 143Hrs left on 02 thru 08, but what are they?
Can't find anything in the manuals.
Thanks
Maintenance just lit up in red at the bottom of the screen.
I went into system->maint. It shows 143Hrs left on 02 thru 08, but what are they?
Can't find anything in the manuals.
Thanks
if it is the blinking maintenance alarm, and you want to reset it, follow tecdoc tec2008_30.pdf
if it is the blinking maintenance alarm, and you want to alter the values or turn it off, follow tecdoc tec2008_46.pdf
Let me know if they did not attach, here...
[email protected]
Doosan Service Technician
[email protected] O:973-618-2461 M:973-803-9479
if it is something else, call me at (973) 618-2461
It is always helpful, when calling, to have the:
Make: (Daewoo, Mecatec, or Doosan)
Model: (Puma 300, Lynx 220, HP 5100, etc...)
Serial number: (P25L0191, MV009-0001562, LP2105, et. al.)
The problem that is occurring.
The last time it ran correctly.
...and if known: What is the last thing it did "right" and the first thing it did "wrong"
(If it is a major process malfunction, it would usually be helpful to have the ladder version, also...)
Doosan Service Technician
[email protected] O:973-618-2461 M:973-803-9479
Thanks, that is exactly what I was looking for.