585,728 active members*
4,120 visitors online*
Register for free
Login

Thread: Acceleration Rate Mach3/others

Results 1 to 2 of 2
  1. 09-28-2013, 03:42 PM #1
    metriccar
    metriccar is offline Registered
    Join Date
    May 2013
    Posts
    26

    Acceleration Rate Mach3/others

    What is the acceleration rate of your table? At what point does acceleration rate begin to produce poor cut quality? Is there a gauge as to what acceleration rate could be for a poor, medium and high end table?
    Reply With Quote Reply With Quote
  2. 09-28-2013, 03:55 PM #2
    Fastest1
    Fastest1 is offline Gold Member
    Join Date
    Nov 2009
    Posts
    4415
    In my understanding, you set accel rates by finding the point at which the motor (stepper in my case) starts to stall. Then reduce by 50% and work your way up.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Mach3 - Feed Rate
    By aucran in forum Novakon
    Replies: 1
    Last Post: 08-04-2012, 12:12 AM
  2. Mach3 Feed Rate While Cutting
    By Barefooter in forum Mach Software (ArtSoft software)
    Replies: 2
    Last Post: 01-29-2012, 07:18 PM
  3. X2 and G540 spindle acceleration rate.
    By TXFred in forum Benchtop Machines
    Replies: 0
    Last Post: 03-03-2011, 01:30 AM
  4. Rapid feed rate with mach3
    By kweierbach in forum Benchtop Machines
    Replies: 9
    Last Post: 06-24-2009, 06:31 PM
  5. Feed Rate in Mach3 I need upport !
    By cnc_swe in forum Mach Mill
    Replies: 2
    Last Post: 02-20-2006, 08:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules