584,858 active members*
4,372 visitors online*
Register for free
Login

Thread: Heidenhain

Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2008
    Posts
    27

    Heidenhain

    Heidenhain 530 mill say handwheel
    D error .
    says check param
    mp7640.
    how?

  2. #2
    Join Date
    Dec 2011
    Posts
    99
    If you have worked in the machine, it is unnecessary to check the parameter.
    Check the cable!
    Replace the electronic handwheel!


    Check parameter:
    Programming & Editing -> [MOD] -> 123 [ENT]
    [GOTO] 7640 [ENT]

    MP7640 Handwheel
    Input:
    0: No handwheel
    1: Reserved
    2: HR 130
    3: Reserved
    4: Reserved
    5: Up to three HR 150 via HRA 110
    6: HR 410
    7 to 10: Reserved
    11: HR420/HR520 without LED activation
    12: In future for HR 550FS wireless handwheel
    13: HR520 with LED activation

Similar Threads

  1. Heidenhain ERM 280
    By beachboy78 in forum Servo Motors / Drives
    Replies: 2
    Last Post: 01-08-2012, 10:49 AM
  2. Heidenhain TNC 155
    By davesnd in forum Bridgeport / Hardinge Mills
    Replies: 2
    Last Post: 06-24-2009, 04:32 AM
  3. Old Heidenhain DRO Help!?
    By scubasteve_911 in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 01-12-2008, 03:29 AM
  4. Heidenhain
    By bluedemon in forum Calibration / Measurement
    Replies: 0
    Last Post: 01-10-2008, 07:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •