[mark562]

Hi all!

Been awhile since I have been here. I bought a Haas VF1 at auction and it arrived last week. After hook ink up and getting activation code from Haas I am getting an under volt alarm and a drive falt on all 4 drives. I supect that it might be setup for 230 or 440 volt and I have 208 volt system in my shop.

Since did not get the books with the machine does any one know we're to check for this in the machine?

Thanks
Mark

[Jim Dawson]

Maybe try here https://www.haascnc.com/service/sear...ction%20Manual

[Machineit]

Hi all!

Been awhile since I have been here. I bought a Haas VF1 at auction and it arrived last week. After hook ink up and getting activation code from Haas I am getting an under volt alarm and a drive falt on all 4 drives. I supect that it might be setup for 230 or 440 volt and I have 208 volt system in my shop.

Since did not get the books with the machine does any one know we're to check for this in the machine?

Thanks
Mark

Look at the data plate on the back.