585,712 active members*
4,302 visitors online*
Register for free
Login

Thread: Demo Mode

Results 1 to 4 of 4
  1. 10-06-2013, 02:48 AM #1
    Square Tech
    Square Tech is offline Registered
    Join Date
    Feb 2007
    Posts
    15

    Demo Mode

    Hi Guys,

    I thought I posted this but I am not seeing it....will try again.

    I have Bob Cad versions 22 and 23 loaded on a newer windows 7 computer and finally have a need for one or the other. I have both dongles (marked well for each version) but both say I am running in the Demo Mode. Are these not loaded correctly or am I missing a prompt somewhere?

    Thanks in advance!

    Steve
    Reply With Quote Reply With Quote
  2. 10-08-2013, 01:40 AM #2
    aldepoalo
    aldepoalo is offline Member
    Join Date
    Mar 2012
    Posts
    1570
    Something on your computer could be blocking the software from reading the usb drive. And if the software can't "see" the hard lock, it will come up in demo mode.

    It could be your virus software. I would check there first....
    Al DePoalo
    Partner Product Manager BobCAD CAM, Inc. 866-408-3226 X147
    Reply With Quote Reply With Quote
  3. 10-08-2013, 02:11 PM #3
    dnelso
    dnelso is offline Registered
    Join Date
    May 2006
    Posts
    238
    Steve i had same problem. Right click on icon and run as administrator and it should work.
    DN
    Reply With Quote Reply With Quote
  4. 10-08-2013, 11:24 PM #4
    Square Tech
    Square Tech is offline Registered
    Join Date
    Feb 2007
    Posts
    15
    Thanks Guys! dnelso hit it. Had to change to administrator for it to work.

    Happy machining!!!

    Steve
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Demo Mode saved drawing
    By cncpilot in forum BobCad-Cam
    Replies: 8
    Last Post: 10-25-2009, 06:03 AM
  2. Can X4 run in DEMO Mode?
    By Allen Thompson in forum Mastercam
    Replies: 6
    Last Post: 06-11-2009, 01:08 PM
  3. demo mode v23 why is it saying im in demo mode
    By chaz6966 in forum BobCad-Cam
    Replies: 3
    Last Post: 03-17-2009, 11:32 PM
  4. Hypermill 5.1 DEMO MODE only. Help?
    By Hemmi in forum Hypermill
    Replies: 7
    Last Post: 11-29-2008, 08:03 AM
  5. X in demo mode
    By mdlmkr in forum Mastercam
    Replies: 2
    Last Post: 10-28-2005, 02:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules