Hi, new here.
I have a waterjet Y (A/B) problem. Machine ran fine for 8 hrs yesterday, but today when trying to home machine, it does fine till it gets to the (Y) homing. YA moves in the negative direction as has done in the past and YB goes in the positive direction putting gantry in bind and setting off faults. I can use the unconstrained move function to re-time YA and YB and then move the gantry in + or negative direction of Y and it will move together (timed) with no problems. I will try to provide any additional information that I have knowledge of. Only had machine for a year. Any help would be appreciated. Thanks