584,817 active members*
4,660 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Xylotex > replacement power supply
Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2013
    Posts
    14

    replacement power supply

    Hi all - my xylotex powersupply has ceased to put out any dc power. I do not see any obvious damage, and am not much good at diagnosing electronics, so I think a new PS is in order. I am wondering what people think about these options (or if you have other ideas)

    Xylotex 24V 5A PS & Fan - $50 + $14 shipping
    24VDC 5.0A Power Supply

    Hengfu 28V 5.5A - $$29 + $15 shipping
    28 Volt Power Supply, 5.5A, 150W, Switching, Hengfu | MPJA.COM

    ?? 24V 6.5A - $23 + $15 shipping
    24 Volt Power Supply, 6.5A 150W | MPJA.COM

    MeanWell USA - 24V 6.5A - $29 + ?? shipping
    Mean Well USA - RS-150-24 - Power Products - Power Supply - Allied Electronics

    I guess it boils down to 24v vs 28v and 5a vs 6.5a - any advantage to any of them? any reason to spend an extra $20-$30 for the Xylotex? (I have the fan...)

    Thanks

    Bart

  2. #2
    Join Date
    Jan 2013
    Posts
    14
    In case its useful in the future -

    This one appears to be identical to the PS that came with my Xylotex:
    24 Volt Power Supply, 6.5A 150W | MPJA.COM

    I bought this one, hoping the extra $4 would get me a little more reliable:
    24 Volt Power Supply, 6.5A, 150W, Switching, Hengfu | MPJA.COM

    I will let you know how it goes...

    Bart

Similar Threads

  1. Replies: 15
    Last Post: 10-29-2013, 12:58 AM
  2. Setting up Bridgeport 412 TNC2500 after power supply replacement
    By gatesy in forum Bridgeport / Hardinge Mills
    Replies: 2
    Last Post: 05-27-2013, 01:46 AM
  3. Power Supply Repair/Replacement
    By 2Bits in forum CNC Machine Related Electronics
    Replies: 6
    Last Post: 11-07-2010, 12:07 AM
  4. Power Supply Repair/Replacement
    By 2Bits in forum DIY CNC Router Table Machines
    Replies: 1
    Last Post: 11-05-2010, 09:35 PM
  5. Power Supply from a computer power supply
    By jmytyk in forum CNC Machine Related Electronics
    Replies: 21
    Last Post: 01-11-2006, 09:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •