I started playing with my Drill Doctor and my LMS3960 mill conversion.
I had to make 30 gussets for a new enclosure design I was working on and started experimenting with my Drill Doctor 750x to make the holes with less effort.
See the writeup here:
Using Drill Bits
Results 1 to 3 of 3
Threaded View
-
10-20-2013, 10:05 AM #1
Registered
- Join Date
- Aug 2010
- Posts
- 686
Drillbit test with mill LMS 3960 mill conversion
Author of: The KRMx01 CNC Books, The KRMx02 CNC Books, The KRmc01 CNC Milling Machine Books, and Building the HANS Electric Gear Clock. All available at www.kronosrobotics.com
Reply With QuoteSimilar Threads
-
Another LMS Mini Mill 3960
By Rescue35 in forum Benchtop MachinesReplies: 18Last Post: 09-14-2015, 06:18 AM -
video of test cut on mill i might buy..is this good?
By acannell in forum Uncategorised MetalWorking MachinesReplies: 6Last Post: 05-31-2013, 08:32 PM -
LMS 3960 HiTorque Mini Mill
By cdavids in forum Benchtop MachinesReplies: 4Last Post: 08-29-2012, 01:45 PM -
How to test a Series I Bridgeport CNC mill?
By ichudov in forum Bridgeport / Hardinge MillsReplies: 12Last Post: 06-28-2012, 07:07 PM -
Recommendations - Micro Mill to CNC Conversion - What mill should I start with.
By enforcer in forum Benchtop MachinesReplies: 18Last Post: 01-31-2012, 02:55 PM
Posting Permissions
