Hey Im Jon, Im 27 Ive worked as a machinist for about 10 years specializing in programming, setup, and machining everything. When I say everything I mean ive worked in aerospace, stamping, plastic injection, and job shops. Ive used software from catia to mastercam, im the most proficient in Gibbs but I am preety good on powermill and worknc as well, for only being 27 Im extremely well rounded in a shop. From 5th axis to 3 + 2. As we speak I work at a great shop running a Euro 2000 with a Fanuc 16M controller here we use gibbs. I joined the forums seeking info on the 16m controller, the first mill I ever ran was an okk with a fanuc controller. Happy to be a part of this forum and I hope I find what Im looking for.