505,963 active members
3,187 visitors online
Register for free
Login
Page 501 of 697 401451491499500501502503511551601
Results 6,001 to 6,012 of 8356
  1. #6001
    Registered
    Join Date
    Dec 2015
    Posts
    2

    Re: Welcome thread-tell us about you.

    Can u help me? I really need ur help if u can. I want cnc milling course, but didn't have enough money to pay the costs. I know, the cost is very expensive, but I've a desire for that course.

  2. #6002
    Registered
    Join Date
    Dec 2015
    Posts
    2

    Re: Welcome thread-tell us about you.

    'm Geordie from Bendigo(ish). I think Apple Turtle Basic with serial control to a "Mouse" with a pen on the floor was my first experience of computer controlled anything. I built a Silicon Chip circuit board engraver years back that was crushed in an accident and then lost focus when I became a dad.

    So I'm looking to re-boot into CNC Milling or Routing and starting from a pretty basic level.

    Ultimately I'll buy a mill and convert it over to CNC so the first step is here; I hope for many more to come.

    I look forward to the conversations and learning curve!

    Geordie.

  3. #6003
    Registered
    Join Date
    Dec 2015
    Posts
    2

    Re: Welcome thread-tell us about you.

    CNC machinist/programmer here in Chester Va, 16 years on CNC, 12 programming. I learned to program writing g code on controller for 4 years, and have been using featurecam for 8. Guess which one I like more. I presently work in a tool and die shop, making plastic injection molds, Richmond tooling.

    Thanks, Anthony

  4. #6004
    Registered
    Join Date
    Dec 2015
    Posts
    1

    Re: Welcome thread-tell us about you.

    Hi all!

  5. #6005
    Registered
    Join Date
    Dec 2015
    Posts
    2

    Re: Welcome thread-tell us about you.

    Hello.

    I'm an electronics student from Spain at a vocational school.

    I'm veryinterested in making my own lab, but I have very low incomes. I bought a Proxxon 50/E "accidentally" and always got interested on self-manufacturing my own electronics designs.

    I'm a long time Linux user, but I know zero about programming. I would like to learn programming after managing to learn electronics.

    Kind regards.

  6. #6006
    Registered
    Join Date
    Dec 2015
    Posts
    1

    Re: Welcome thread-tell us about you.

    Hello everyone! :cheers:

  7. #6007
    Registered
    Join Date
    Aug 2015
    Posts
    7

    Re: Welcome thread-tell us about you.

    Hello Everyone from Ontario Canada
    I am a truck and coach technician, I had taken several courses on machining and fabrication, prior to becoming a Truck and coach tech.
    I have a keen interest in fabrication, and like to create things from nothing. Rekindled the flame for fab work and bought Craftex Ct 129 a while back for my home garage and am looking to buy a lathe eventually.

    I would like to convert my craftex to cnc, but am having issues with it... so at the moment would like to just get it running properly.

    Cheers

  8. #6008
    Registered
    Join Date
    Dec 2015
    Posts
    1

    Re: Welcome thread-tell us about you.

    hallow every one im sami
    (wedge)

  9. #6009
    Registered
    Join Date
    Dec 2015
    Posts
    10

    Re: Welcome thread-tell us about you.

    Hello,
    My name is Wayne and I live in the State of Washington. I recently bought a Ghost Gunner and while the included programming is OK, I have had a great time trying to write my own G-Code to further utilize the machine. I have absolutely no previous CNC or G-Code experience. Autodesk Fusion has been a great help but I would like to understand and modify what Fusion puts out. I am having a lot of fun experimenting but I am quickly realizing I need all the advice and information I can find!

  10. #6010
    Registered
    Join Date
    Dec 2015
    Posts
    1

    Re: Welcome thread-tell us about you.

    Hello all!

    New to CNC via ShapeOko, now I'm trying to make my own.

    Good day,
    Julian

  11. #6011
    Registered
    Join Date
    Dec 2015
    Posts
    1

    Re: Welcome thread-tell us about you.

    I am an experienced CNC tech and PLC Control Engineer who has a deep interest in motion control system and robotics. I have some small CNC machines that I am currently converting to closed looped stepper control. I Also have a number of CNC open loop engraving machines, and a number of robotic projects I am in the process of designing as time allows.

  12. #6012
    Registered
    Join Date
    Dec 2015
    Posts
    3

    Re: Welcome thread-tell us about you.

    Hi All!

    I'm a software developer by profession but I spend a lot of free time playing with electronics. I want to build my own CNC so that I can mill custom parts for my electronics projects. Looking forward to engaging with and learning from everyone.

    Cheers :cheers:

Page 501 of 697 401451491499500501502503511551601

Similar Threads

  1. Thread spec for camera lens filter thread
    By cmays in forum General Metalwork Discussion
    Replies: 6
    Last Post: 07-20-2016, 10:43 AM
  2. Thread Mill Wizard - Slanted thread produced
    By ngr1 in forum Mach Wizards, Macros, & Addons
    Replies: 5
    Last Post: 07-22-2012, 07:23 PM
  3. Special ID thread. sp-400 "M" type thread 8TPI
    By Captain Crunch in forum General Metalwork Discussion
    Replies: 1
    Last Post: 04-05-2012, 09:39 AM
  4. acme thread combos and thread mixing
    By calaber40 in forum Linear and Rotary Motion
    Replies: 5
    Last Post: 05-16-2009, 02:04 AM
  5. Thread mill external NPT thread
    By cutting edge in forum General Metalwork Discussion
    Replies: 11
    Last Post: 09-15-2008, 02:33 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •