[mbam]

Any idea where to get a replacement membrane for this machine? It is differant from all the ones I see online - pic attached

Googling the part number which is A98L-0005-0032#T produces no hits.

Thanks!!

[underthetire]

Fanuc.

[maver1ck]

From Fanuc $85. The cycle start button is the only one on my customer's that wore out too.

If you don't mind, I'd like to know your opinion of the machine (preferably by sending me a PM). There is only one of these with a Fanuc control in my area, and the customer has asked me to sell it for them, but I would like to know other's opinions before I agree to sell it to someone else. It seems to be a good machine with less than 3000 hours on it, but am curious if there are any common issues I need to let people know about.

[mbam]

Thanks guys, all kidding aside I am so used to older machines where parts are scarce I never thought to try Fanuc.

Mav, this machine is new to us and I have not run it yet. I'll let you know after I run some parts. I will say mine has way more than 3000 hours!