[Grasfer]

Hi, can't figure out how to mill this part out from the stock. It keeps milling on the side a little. If i try to change mill type and stuff edgecam does not mill the "pocket". It's a vertical cnc machine. I get it to work fine with a 8mm mill but not a 10mm which i want to use for stability and stuff.

Thanks in advanced.

Attachment 205928
Attachment 205930

The ppf file if anyone want to help me or give pointer.
https://dl.dropboxusercontent.com/u/...7/millhelp.ppf

[Grasfer]

Think i solved it with making boxes and using containment boundrary, atleast it looks alright in the simulation :P

[Reliefs3D]

Meybe the lead in/lead out moves are causing the problem, check it out. A proper toolpath should never engage into the model of the part...