[vmdrafik]

Pl. help. how can we transfer data from one machine to opposite same machine in fanuc 31i? there is a m-code available for that. but we cant use that. that code is m95. pl.explain

Sent from my Titanium S5 using Tapatalk

[dcoupar]

What machine is this? I've never heard of an M-code for transferring data.

I would think you could make a "crossover" cable like this, then get one machine ready to receive and then send from the other.

DB25M <---------------------> DB25M

1 <--------------------------- (no connection)
2 <---------------------------> 3
3 <---------------------------> 2
7 <---------------------------> 7
4 <> 5 jumped on each end.
6 <> 8 <> 20 jumped on each end.

[vmdrafik]

Thanks for ur reply. that is fanuc 31i- A5 Tos-kurim horizontal floor type machining centre. At the middle longitudinal bed, and having machine in both sides. There is a mcode available in maintenance manual.

Sent from my Titanium S5 using Tapatalk