[swealf]

Hello.
Can anybody tell me which one that is the oldest. Is it Fanuc OT series or Fanuc 18-series (msc-518) ?

[guhl]

AFAIK, in case of systems without "i" index
0TA, 0TB are older than 18T
0TC - a contemporary
0TD is a contemporary or newer

[memoryman]

The 0A,0B and 0C were designed in the late 80s. The 0D came in the early 90s, same as the 16A/18A. The 16/18B and 16/18C came after.

[swealf]

Thank you for the help

[underthetire]

MSC-518 (mori designation) came after the 0 ( Mft-4 mori designation)

[TheDuctTapeMan]

Can anybody tell me if there is a way to adjust the screen brightness on these? (MSC-518)
It has the new LCD instead of the old CRT monitor and it looks like the backlight is still functioning, so I'm curious if there is a Parameter or knob I'm missing.
Its on a Mori SL-300

[fordav11]

On my machine (MSG-500) there's a PMC parameter (not a standard Fanuc parameter)
normally it should not be necessary to play with the brightness.
it sounds like you have some kind of LCD issue but you dont say what?

[underthetire]

If it has the black an white LCD, the contrast adjustment is in the settings, second page down I believe.

Sent from my G-Tab Quantum using Tapatalk

[TheDuctTapeMan]

Thanks. I'll take a look.
The issue is that some of our operators are old and can't see the screen very well. I can see and read it just fine.
However I do suspect that lcd backlight might be going bad.