Pl. help. how can we transfer data from one machine to opposite same machine in fanuc 31i? there is a m-code available for that. but we cant use that. that code is m95. pl.explain
Sent from my Titanium S5 using Tapatalk
Pl. help. how can we transfer data from one machine to opposite same machine in fanuc 31i? there is a m-code available for that. but we cant use that. that code is m95. pl.explain
Sent from my Titanium S5 using Tapatalk
What machine is this? I've never heard of an M-code for transferring data.
I would think you could make a "crossover" cable like this, then get one machine ready to receive and then send from the other.
DB25M <---------------------> DB25M
1 <--------------------------- (no connection)
2 <---------------------------> 3
3 <---------------------------> 2
7 <---------------------------> 7
4 <> 5 jumped on each end.
6 <> 8 <> 20 jumped on each end.
Thanks for ur reply. that is fanuc 31i- A5 Tos-kurim horizontal floor type machining centre. At the middle longitudinal bed, and having machine in both sides. There is a mcode available in maintenance manual.
Sent from my Titanium S5 using Tapatalk