I am running Mastercam 9, I downloaded a post from emastercam, but I can't post directly to the machine, I have to go through the Fagor dnc program then upload it to the machine into programs. When I start the program I get get an error message: 0002 Improper data. N114 G43 D1 Z50 if I delete the line from the program it then runs through the rest of the program which at the moment seem to be fine, at the end of the program the machine returns to its home position, but likewise if I delete the line from the program it stops at the end without returning to its home position. Can anyone help me modify my post so that I don't have to do this? Or help me post directly to the machine?