[frsdirect@bluey]

Hi All,

I have a Dynamechtronics DM1007 which was not used for a long time and it appears that the parameters have reset to a default setting. I need to be able to get into the system parameters and reset them but I do not know the password to get into them. Does anyone know the correct procedure. The machine is a 1996 model and the system is a Dyna 4M V1.42.

Thanks,
Bob

[acannell]

Hi All,

I have a Dynamechtronics DM1007 which was not used for a long time and it appears that the parameters have reset to a default setting. I need to be able to get into the system parameters and reset them but I do not know the password to get into them. Does anyone know the correct procedure. The machine is a 1996 model and the system is a Dyna 4M V1.42.

Thanks,
Bob

i know the procedure,but i swore not to blab it out on a forum, so if you want it i can PM you it or you can skype me and i can help you through it

[frsdirect@bluey]

Hi,

Thanks, I was told the procedure some years ago but could not get to the machine then. Since then I have forgotten it. If you could email it on [email protected] it would be very much appreciated.

Regards,
Bob

[frsdirect@bluey]

i know the procedure,but i swore not to blab it out on a forum, so if you want it i can PM you it or you can skype me and i can help you through it

Thanks for that. Please can you email me the procedure on [email protected]

Regards,
Bob