[Falcon69]

Hello,

I live in Vancouver, WA and am looking for people in the Portland and Vancouver area who own a functional DIY CNC machine.

I am developing a new product, and need to test it against several Breakout Boards to make sure it functions properly. I am looking for anyone with a working and functioning machine using breakout boards such as:

PMDX-126
GECKO G540
C10
C11
C23
C32
C35
C11G
KL-DB25

Or any other functional machine with a different Breakout Board.

In return, I will give 4 hall effect limit switches. They have a 3 wire hook up and a single Led that lights when tripped. It features a quick disconnect using a 3.5mm headphone plug. (not supplied)

Attachment 207938

It is very small, measures 11.4mm x 24.7mm

Post here if interested and PM your address/phone number.

Thank You in Advance.
Jason

[nlancaster]

I am in Tigard Oregon!

I have a C10 breakout board.

I would love to work with some hal effect sensors.