Move in a Plus direction X and Y
I guess the title says it all. Everything I create in Bobcad wants to start cutting in a negative X and Y. I would like to have it out put G code that starts at or near X=0 Y=0 and moves toward X plus and Y plus. I have changed the Axis. I have set the origin at all 4 corners. I am new and do not have anyone that knows CNC. If I move the machine to a spot and zero it at that spot and try to run the code the machine runs the full distance to the negative to start cutting. I could have Mach3 set up wrong. Maybe I need to set the machine that -60" and -30" is=0 so it guts right. Then maybe I am completely wrong. Thank you for any help or insight.
Don
The time has come the woodworker said to speak of many things. 0f routers and Wood , chips and paints and stains and CNC and other things.