I bought an LG500 laser and these were packed in with the laser. I know what the micro switches are but don't know what the jumper cables are and the ceramic looks like a resister are for. Also what is the green connector is for.
I bought an LG500 laser and these were packed in with the laser. I know what the micro switches are but don't know what the jumper cables are and the ceramic looks like a resister are for. Also what is the green connector is for.
green connector looks like an interlock for safety.
the resistor is possibly used with the two wire leads to test the power supply?
Just guesses from me...does your manual not mention them in english?
A loopback to enable the PSU when wired via the ballast resistor for testing the PSU instead of having a tube fitted.
Wired plug = loopback
Ceramic = resistor
cheers
Dave
Dave is right.