Hello!
I have a problem with Lantek program...When is generated the CNC program, the line which definde the sheet thickness (#101=1.0, for exemple) is missing, soo I have to introduce this line by hand...This is mean that, I have to modify all CNC program for every punch program.It's not ok, because the CNC programs are too long and it's take time to modify....
Does everybody know if this can be fixed...It is an option to apply to generate this line automatically? Or was the install problem?
Thank You!
Results 1 to 4 of 4
-
11-15-2013, 07:47 PM #1
Registered
- Join Date
- Nov 2013
- Posts
- 1
NEED HELP WITH Lantek Expert Com program
-
03-07-2014, 05:29 AM #2
Registered
- Join Date
- Apr 2010
- Posts
- 22
Hi. Did you found a solution ? If not PM to me and i can see what i can do
-
03-07-2014, 05:31 AM #3
Registered
- Join Date
- Apr 2010
- Posts
- 22
Hi. Did you found a solution ? If not PM to me and i can see if i can help you out
-
10-28-2014, 07:04 AM #4
Member
- Join Date
- Oct 2014
- Posts
- 9
Re: NEED HELP WITH Lantek Expert Com program
hello.
have anyone experience this problem or can help with a solution
http://www.cnczone.com/forums/genera...ml#post1582290
Similar Threads
-
lantek expert 1
By boomer187um in forum CamSoft ProductsReplies: 7Last Post: 01-13-2024, 09:26 AM -
i'm looking for lantek expert v 27
By agiorgos in forum CNC Plasma / Oxy Fuel Cutting MachinesReplies: 19Last Post: 08-22-2023, 11:33 AM -
lantek expert use
By agiorgos in forum CNC Plasma / Oxy Fuel Cutting MachinesReplies: 3Last Post: 05-30-2020, 08:56 AM -
Problem when Lantek generate the program
By ClicK10 in forum Uncategorised CAM DiscussionReplies: 2Last Post: 03-07-2014, 05:28 AM -
Lantek Expert
By one5 in forum Laser Control SoftwareReplies: 0Last Post: 04-20-2013, 07:29 AM
Posting Permissions
